Honda CRF50F 2004-2015 - Rear Brake Service

REAR WHEEL/BRAKE/SUSPENSION
Install the spring onto the brake rod and the joint
pin into the brake arm.
Connect the brake rod and
install the adjusting nut.
Adjust the drive chain slack (page 3-13).
Tighten the
axle n ut to the specified torque.
TORQUE: 47 N'm (4.8 kgf ·m. 35 IbUt)
REAR BRAKE
INSPECTION
13-10
Remove the brake panel from the rear wheel (page
13-5).
Measure the rear brake dr um 1.0.
SERVICE LIMIT: 80.5 mm (3.17 in )
Measure the brake lining thickness.
S ERVICE LIMIT: 2. 0 mm (O. OS in)
DISASSEMBLY
Remove the brake shoes and spring.
SHOES
SPRING