Honda CRF50F 2004-2015 - Page 151

CRANKSHAFT I TRANSMISSION/ KICKSTARTER
Install the rubber cap.
Install the return spring and retainer onto the kick- ::= ====~~ ~L~;:; ~; ~:r, ~~iG
starter spindle.
Temporarily install the kickstarter pedal.
Install
the spring ends onto the retainer and crank-
case lug as shown and press the retainer to set its
edge against the stepped part
of the crankcase
while turning the pedal counte rcl ockwise.
Install the snap ring into the groove in the kick·
starter spindle securely.
11-17