Honda CTX700A - Page 76

Engine Oil u Changing Engine Oil & Filter
73
Maintenance
7. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8. Install a new oil filter and tighten.
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
10. Fill the crankcase with the recommended
oil (
2 P. 56) and install the oil fill cap/
dipstick.
11. Check the oil level. 2 P. 70
12. Check that there are no oil leaks.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
Rubber seal
Oil filter
Required oil
CTX700A
When changing oil & engine oil
filter:
3.4 litres (3.6 US qt, 3.0 Imp qt)
When changing oil only:
3.1 litres (3.3 US qt, 2.7 Imp qt)
CTX700D
When changing oil & engine oil
filter:
3.4 litres (3.6 US qt, 3.0 Imp qt)
When changing oil only:
3.2 litres (3.4 US qt, 2.8 Imp qt)
14 CTX700-32MJF8000.book 73 ページ ２０１３年５月９日 木曜日 午後９時５９分