27
OPERATION
5.When you switch the AC circuit breaker to the ON position, LED will
turn off.
If the GFCI and AC circuit breaker do
not function as described, take
the
generator to an authorized Honda generator dealer for repair.
During generator use, if the AC circuit breaker trips, this usually
indica
tes a faulty p
ower tool, appliance, or cord.
If that occurs, perform test steps 1 thro
ugh 5 to verify that the GFCI
and AC circuit breaker are in proper working order. If the GFCI and
AC circuit breaker do test correctly, then the fault is likely to be in
the power tool, appliance, or cord. Repair or replace the faulty power
tool, appliance, or cord before further use.
31Z037210.book 27 ページ ２０１４年１月２７日 月曜日 午後１２時２分
To Next Page
Loading...
