50
STORAGE
Engine Oil
1.Change the engine oil (see page 38).
2.Remove the spark plug (see page 44).
3.Pour a teaspoon (5 cc) of clean engine oil into the cylinder.
4.Pull the starter rope several times to distribute the oil in the cylinder.
5.Reinstall the spark plug (see page 45).
6.Slowly pull the starter grip until resistance
is felt. At this point, the
piston is coming up on its compression stroke and both the intake
and exhaust valves are closed. Storing the engine in this position will
help to protect it from internal corrosion. Return the starter grip
gently.
31Z037210.book 50 ページ ２０１４年１月２７日 月曜日 午後１２時２分
To Next Page
Loading...
