99
uuIndicatorsu
Continued
*1:Canadian models only: Apply and hold the brake pedal before selecting the ON mode.
Indicator Name On/Blinking Explanation Message
*1
Immobilizer
System
Indicator
• Blinks if the immobilizer system
cannot recognize the key
information.
• Blinks - You cannot start the power
system. Set the power mode to VEHICLE
OFF
*1
, then select the ON mode again.
• Repeatedly blinks - The system may be
malfunctioning. Have your vehicle
checked by a dealer.
• Do not attempt to alter this system or add
other devices to it. Electrical problems can
occur.
Security System
Alarm Indicator
• Blinks when the security system
alarm has been set.
2 Security System Alarm P. 190
—
21 INSIGHT-31TXM6200.book 99 ページ 2020年2月5日 水曜日 午前10時0分