front bumper.
1Radar Sensor
Avoid strong impacts to the radar sensor cover.
For the CMBS
TM
to work properly:
Always keep the radar sensor cover clean.
Never use chemical solvents or polishing powder for
cleaning the sensor cover. Clean it with water or a
mild detergent.
Do not put a sticker on the radar sensor cover or
replace the radar sensor cover.
If you need the radar sensor to be repaired, or
removed, or the radar sensor cover is strongly
impacted, turn off the system by using the safety
support switch and take your vehicle to a dealer.
2 CMBS
TM
On and Off P. 493
If the vehicle is involved in any of the following
situations, the radar sensor may not work properly.
Have your vehicle checked by a dealer:
• Your vehicle is involved in a frontal collision
• Your vehicle drives through deep water or is
submerged in deep water
• Your vehicle strongly strikes a bump, curb, chock,
or embankment that could jar the radar sensor
To Next Page
Loading...
