103
uuIndicatorsu
Continued
Indicator Name On/Blinking Explanation Message
Safety Support
Indicator
(Amber)
●
Comes on if there is a problem with
RDM, CMBS
TM
or blind spot
information system
*
.
●
Stays on constantly - Have your vehicle
checked by a dealer.
●
Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.
●
Make sure the total load is within the
Maximum Load Limit.
2 Maximum Load Limit P. 451
●
Stays on constantly - Have your vehicle
checked by a dealer.
●
Comes on if the RDM and CMBS
TM
are deactivated temporarily after
the 12-volt battery has been
disconnected and then re-
connected.
●
Drive a short distance at more than 12
mph (20 km/h). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
* Not available on all models
21 INSIGHT-31TXM6200.book 103 ページ 2020年2月5日 水曜日 午前10時0分