121
uuIndicatorsuDriver Information Interface Warning and Information Messages
Continued
Message Condition Explanation
• Appears when you set the power mode to OFF while
driving.
• Immediately stop in a safe place, set the parking brake,
then restart the power system. If the message
disappears, continue driving.
• Appears if the vehicle is stopped and the driver’s seat
belt is unfastened, as there is a possibility that the
vehicle may roll.
• When the power system is ON or when you are parking
or exiting the vehicle, put the transmission into (P
before releasing the brake pedal.
2 Shift Operation P. 465
• Appears if you depress the accelerator pedal when
the transmission is in (N.
• Release the accelerator pedal. After that, depress the
brake pedal and change the transmission position.
●
Appears if the shift position is repeatedly changed
between
(P and another position.
●
Wait awhile, then change the shift position.
●
Appears if the 12V battery is not charged enough to
make it possible to change shift positions.
●
Keep the power system on and wait awhile.
●
The battery may be nearing the end of its life.
Have it checked by a dealer.
21 INSIGHT-31TXM6200.book 121 ページ ２０２０年２月５日 水曜日 午前１０時０分
To Next Page
Loading...
