123
uuIndicatorsuDriver Information Interface Warning and Information Messages
Continued
Message Condition Explanation
• Appears if there is a problem with the auto high-
beam.
• Manually operate the headlight switch.
• If you are driving with the high-beam headlights when
this happens, the headlights are changed to low beams.
●
Appears when ACC with Low Speed Follow has been
automatically canceled.
●
You can resume the set speed after the condition that
caused ACC with Low Speed Follow to cancel improves.
Press the RES/+ button.
2 Adaptive Cruise Control (ACC) with Low Speed
Follow P. 499
●
Flashes when the system senses a likely collision with
a vehicle in front of you.
●
Take the appropriate means to prevent a collision (apply
the brakes, change lanes, etc.)
2 Collision Mitigation Braking System
TM
(CMBS
TM
)
P. 490
2 Adaptive Cruise Control (ACC) with Low Speed
Follow P. 499
21 INSIGHT-31TXM6200.book 123 ページ ２０２０年２月５日 水曜日 午前１０時０分
To Next Page
Loading...
