135
uuGauges and Driver Information InterfaceuGauges
■
Electric motor
The power level supplied to the electric motor
is displayed by the readings on the POWER
side.
■
Battery charge in progress
The power level supplied to the high voltage
battery is displayed by readings on the
CHARGE side.
■
Speed Unit
Enables you to show another speed unit on
the driver information interface and set the
displayed measurements to read in either mph
and km/h.
Select the Gauge Only screen.
2 Accessing contents in the main display
P. 136
Press and hold the left selector wheel when
you select the Gauge Only on the driver
information interface. Each time you do this,
the unit will change from mph to km/h or vice
versa. After this, a confirmation screen will
appear for a few seconds.
■
POWER/CHARGE Gauge
21 INSIGHT-31TXM6200.book 135 ページ ２０２０年２月５日 水曜日 午前１０時０分
To Next Page
Loading...
