586
uuReplacing Light BulbsuRear Turn Signal Light Bulbs
Rear Turn Signal Light Bulbs
When replacing, use the following bulbs.
1. Use a Phillips-head screwdriver or socket to
remove the bolts.
2. Pull the light assembly out of the rear pillar.
3. Turn the socket counterclockwise and
remove it.
4. Remove the old bulb and insert a new bulb.
5. Slide the light assembly onto the guide on
the body.
6. Align the pins with the body grommets,
then push in until they fully seat.
Brake and Rear Side Marker Lights
Brake and rear side marker Lights are LED type. Have an authorized Honda dealer
inspect and replace the light assembly.
Rear Turn Signal Light: 21 W (Amber)
21 INSIGHT-31TXM6200.book 586 ページ ２０２０年２月５日 水曜日 午前１０時０分
To Next Page
Loading...
