Continued
639
uuJump Startingu
5. Connect the other end of the second
jumper cable to the engine mounting bolt
as shown. Do not connect this jumper cable
to any other part.
6. If your vehicle is connected to another
vehicle, start the assisting vehicle’s engine
and increase its rpm slightly.
7. Attempt to start your vehicle’s engine. If it
turns over slowly, check that the jumper
cables have good metal-to-metal contact.
1Jump Starting
12-volt battery performance degrades in cold
conditions and may prevent the engine from starting.
21 INSIGHT-31TXM6200.book 639 ページ ２０２０年２月５日 水曜日 午前１０時０分
To Next Page
Loading...
