91
uuIndicatorsu
Continued
Indicator Name On/Blinking Explanation Message
Malfunction
Indicator Lamp
• After you have set the power mode
to ON, the vehicle performs system
checks. However, if the readiness
codes have not been set by that
time, this indicator will blink five
times and then go off.
• Comes on if there is a problem with
the emissions control system.
• Blinks when a misfire in the
engine’s cylinders is detected.
• Comes on if the fuel fill cap is loose
or missing.
• Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 667
• Comes on while driving - Have your
vehicle checked by a dealer.
• Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the power system for 10
minutes or more, and wait for it to cool
down. Then, take your vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 645
• Comes on - Check the fuel cap before
taking your vehicle to a dealer.
21 INSIGHT-31TXM6200.book 91 ページ ２０２０年２月５日 水曜日 午前１０時０分
To Next Page
Loading...
