Your doorbell can also be used as a nightlight.
1. Plug the doorbell into a wall outlet.
2. Press and hold the Night-light button to select the halo color.
3. Release the Night-light button when you see the color you want.
Secret Knock
You can set up a Secret Knock that makes a different ring and halo light color for each push button. The Secret Knock is triggered by pressing the push button quickly 3
times.
1. Press the push button 3 times quickly.
2. Within 12 seconds of pressing the push button, press the Music button to select the ring for the Secret Knock.
3. Within 12 seconds of pressing the push button, press the Sunlight button to select a halo light color for the Secret Knock.
Maintenance
Your doorbell and push-button require no maintenance except to periodically change the battery.
If using the correct battery, its life should be approximate:
Up to 2 years for the push button; replace with CR2032 lithium battery
Low Battery Notification
When the push-button batteries are low, two beep sounds are heard after the normal tune.
Reset
This process removes all pairings, including the push button that came with this doorbell:
1. Unplug the doorbell.
2. Press and hold the Setting button, and plug the doorbell back in at the same time.
3. The halo light will circle, and the doorbell is returned to its factory default settings.
Specifications
Doorbell Push Button
Operating Temperature 23°F to 104°F (-5°C to 40°C) -4°F to 122°F (-20°C to 50°C)
ActivLinr 916.8 MHz 916.8 MHz
Range (open field) 350 ft. (106 m) 350 ft. (106 m)
Sound Level (typical) 84d BA –
RF Power – <1.2W
Battery Type Input 100 V-240 V- 50-60 Hz 300 mA CR2032
Battery Life (5 activations/day) – Up to 2 years
Rainproof N/A Pass UL1598 rain test.
Precautions and warnings
CAUTION: Before operating, make sure that the product components have not been damaged, have not been exposed to water or high temperatures.
Troubleshooting
To Next Page
Loading...
