15 69-2715EF—07
Adjusting program schedules
1 Press Set Clock/Day/Schedule, then Set Schedule.
2 Press s or t to set your Monday (Mon)
Wake time, then press Next.
3 Press s or t to set the temperature for this
period, then press Next.
4 Set time and temperature for the next time
period (Leave). Repeat Steps 2 and 3 for each
time period.
5 Press Next to set time periods for the next day.
Repeat Steps 2 through 4 for each day.
6 Press Done to save and exit.
Note: Make sure the thermostat is set to the
system mode you want to program (Heat or
Cool).
Overriding schedules temporarily
Press s or t to immediately adjust the
temperature.
The new temperature will be maintained
only until the next programmed time period
begins.
To cancel the temporary setting at any time,
press Cancel. The program schedule will
resume.
M33896A
HOLD
Overriding schedules permanently
1 Press HOLD to permanently adjust
the temperature. This will turn off the
program schedule.
2 Press s or t to adjust the temperature
setting. The temperature you set will
be maintained 24 hours a day until you
manually change it or press Cancel to
resume the program schedule
HOLD
To Next Page
Loading...
Need help?
General
