T2 Pro THECC11060MX
Programmable Thermostat
Installation Instructions
Read before installing the unit
Package Includes:
• T2 Pro Thermostat
• Wall Plate Mounting System
• Terminal Block (12 to 14 AWG)
• Screws
• Installation Instructions and User
Guide
Wiring terminal designation
Selecting Location
Terminal Designation
L Line
2 Pump
1 Low
C High
L
2
1
C
Power Supply: 120V~ @ 60 Hz, 13A
Install the thermostat about 5 ft. (1.5m) above the floor in an area with good air
circulation at average temperature.
Do not install the thermostat where it can be affected by:
– Drafts or dead spots behind doors and in corners.
– Hot or cold air from ducts.
– Radiant heat from sun or appliances.
– Concealed pipes and chimneys.
– Unheated (uncooled) areas such as an outside wall behind the thermostat.
To Next Page
Need help?
General
