Honeywell Home T2 Pro THECC11060MX User Manual

T2 Pro THECC11060MX
Programmable Thermostat
Installation Instructions
Read before installing the unit
Package Includes:
• T2 Pro Thermostat
• Wall Plate Mounting System
• Terminal Block (12 to 14 AWG)
• Screws
• Installation Instructions and User
Guide
Wiring terminal designation
Selecting Location
Terminal Designation
L Line
2 Pump
1 Low
C High
M37448
L
2
1
C
Power Supply: 120V~ @ 60 Hz, 13A
Install the thermostat about 5 ft. (1.5m) above the floor in an area with good air
circulation at average temperature.
Do not install the thermostat where it can be affected by:
– Drafts or dead spots behind doors and in corners.
– Hot or cold air from ducts.
– Radiant heat from sun or appliances.
– Concealed pipes and chimneys.
– Unheated (uncooled) areas such as an outside wall behind the thermostat.

Honeywell Home T2 Pro THECC11060MX Specifications

General

Brand	Honeywell Home
Model	T2 Pro THECC11060MX
Category	Thermostat
Language	English

Summary

Installation Instructions

Wiring terminal designation

Details wiring terminals for the thermostat's power supply and designation.

Selecting Location

Provides guidance on choosing the optimal installation location for the thermostat.

Terminal block assembly

Describes how to assemble the terminal block with the wall plate.

Wall plate mounting system installation

Steps for installing the wall plate mounting system, including safety warnings.

Thermostat mounting

Steps for physically mounting the thermostat onto the installed wall plate.

Set the time and day

Instructions for setting the current time and day on the thermostat display.

System test

Procedures for testing the thermostat's functionality with different modes and speeds.

Installer setup (ISU)

Guide to accessing and configuring advanced installer setup (ISU) options.

Specifications

Customer Assistance