7
Operating modes
Press the MODE button repeatedly to select an operating mode.
You can set the Hot Water and Heating modes separately, by
pressing the appropriate button as shown at left. Both work the
same way:
Cont: Heating or Hot Water remains on continuously.
Auto: In this mode the programmer follows a daily schedule for
the Hot Water or Heating, turning each on and off at preset times
during the day (see page 8).
Once: In this mode the Heating or Hot Water is turned on at the
first programmed “On” time of the day, and remains on until the
last programmed “Off” time (see page 8).
Off: Heating or Hot Water remains off at all times.
HOT WATER HEATING
12:34
PM
mon tue wed thu fri sat sun
30/12/2010
cont
once
auto
off
cont
once
auto
off
on 1
off 1
on 2
off 2
on 3
off 3
Press to
change
hot water
operating
mode
Press to
change
heating
operating
mode
To Next Page
Loading...
Need help?
General
