Owner’s Guide
18
Power supply: 240/208 VAC, 50/60 Hz
Maximum load: 15.0 A (3600 W @ 240 VAC)
(3120 W @ 208 VAC)
Heating cycle: 15 minutes
Setpoint range: 40 °F to 86 °F (5 °C to 30 °C)
Display range: 32 °F to 158 °F (0 °C to 70 °C)
Resolution: 1 °F (0.5 °C)
Data protection: In the event of a power failure, most settings are saved. However the time and
Daylight Saving Time must be set if the power failure lasts more than 6 hours. The thermostat will
return to the mode that was active prior to the power failure.
Technical Specifications
To Next Page
Loading...
Need help?
General
