Honeywell 35 Series - HDD Installation; Unpacking the NVR; Figure 1 Cut the Carton; Figure 2 Open the Gift Box

I
Honeywell 35 Series NVR HDD Installation Guide
HDD installation
Unpacking the NVR
Note:
The below description is taking HN35080200 as an example.
1. Cut the carton carefully with a knife to open it.
There are two NVRs inside the carton.
Figure 1 Cut The Carton
2. Take out the NVR. There are 2 EPEs, 1 accessory box and 1 NVR inside the gift box.
Figure 2 Open The Gift Box
3. Unwrap the NVR PE bag. Unscrew 6 screws in total on three sides of the NVR and take out
the NVR’s top cover.
Figure 3 Take Out The NVR’s Top Cover