EasyManua.ls Logo

Honeywell 50609 - User Manual

Honeywell 50609
10 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Xerxes Ceiling Fan
User Guide
Model #50608, 50609
Home

Table of Contents

Questions and Answers

  • C
    Cody ThomasAug 3, 2025
    Why is my Honeywell 50609 Fan remote not working?
    • K
      Kendra GarciaAug 3, 2025
      The Honeywell Fan remote may not be working due to a power surge that cleared its memory, requiring re-syncing. To re-sync, turn off the main power, then turn it back on. Within 30 seconds, press and hold the high and low speed buttons on the remote at the same time for 5 seconds. The LED indicator will flash 3 times, signaling a successful synchronization. Once complete, the fan will start on the low speed with the light (if applicable) off. Also, make sure that the remote has a new 12V battery. If you have several remote fans nearby, turn off the power to the other fans and re-sync the problematic one.
  • R
    Rachel JonesAug 10, 2025
    How to make my Honeywell 50609 quieter?
    • C
      Christopher MontgomeryAug 10, 2025
      To reduce noise from your Honeywell Fan, check and tighten all screws that hold the fan blades to the blade arms and the motor. Replace any cracked blades. Avoid using a full range dimmer switch to control the fan speed. Ensure the outlet box is secured to the building structure, and that the mounting bracket is secured to the outlet box with tight screws.
  • C
    Charles GriffinAug 18, 2025
    How to fix a Honeywell 50609 that wobbles a lot?
    • S
      samantha42Aug 19, 2025
      If your Honeywell Fan wobbles excessively, start by checking and tightening all screws that hold the fan blades to the blade arms and the blade arms to the motor. You can also try switching one blade with a blade from the opposite side, or balance the fan using the blade balancing kit. Additionally, turn off the power, loosen the canopy, and verify that the mounting bracket is secure to the electrical outlet box, ensuring it's flush without movement. Check that the outlet box is secure. If the issue persists, consider using a longer downrod (sold separately) or moving the fan to another location. Finally, lift up the yoke cover and tighten the set screws on the yoke until secure.
  • S
    Stephanie JordanAug 26, 2025
    What to do if my Honeywell 50609 does not turn on?
    • P
      Peter HarrisAug 27, 2025
      If your Honeywell Fan does not move, firmly push the reverse switch completely left or right. Ensure the wall switch is turned on. Check that the power is on and the fuse (breaker) is working. Turn the power off and check all connections at the ceiling outlet box.

Summary

Package Contents

Hardware Contents

Safety Information

Care and Maintenance

Preparation

Initial Installation

Standard or Angle Mount Instructions

Closemount Instructions (Optional)

Final Installation

Operating Instructions

Remote Control Buttons

Details functions of buttons A through F on the remote for fan and light control.

Reverse Switch Usage

Explains how to use the reverse switch for optimizing airflow for different seasons.

Troubleshooting

Fan Performance Issues

Solutions for fan not moving, noisy operation, and excessive wobbling.

Connectivity & Light Problems

Troubleshooting steps for lights not working and remote control malfunctions.

Limited Lifetime Warranty

Replacement Parts List

Honeywell 50609 Specifications

General IconGeneral
BrandHoneywell
Model50609
CategoryFan
LanguageEnglish

Related product manuals