Honeywell 5800CO User Manual

How to Remove and Reposition a Honeywell Carbon Monoxide Sensor Model 5800CO
Description
This page shows how to remove and reposition a Honeywell Carbon Monoxide Sensor Model
5800CO
Please read through the directions in its entirety before commencing.
Preparation
***IMPORTANT customers who use myadt.ca*** Before removing the sensor, place the
panel on test mode through myadt.ca. After logging in:
1. Tap [Home]
2. Tap [Place on Test]
3. Enter your expiration date and time
4. Enter your password
5. Tap [Yes-Proceed]
Parts Required
1. A Phillips screwdriver
2. A thin sharp knife

Honeywell 5800CO Specifications

General

Type	Carbon Monoxide Detector
Frequency	345 MHz
Alarm Sound Level	85 dB at 10 feet
Sensor Life	10 years
Battery Type	3V Lithium
Battery Life	5 years
Operating Temperature	0°C to 37.8°C (32°F to 100°F)
Operating Humidity	15% to 95% Non-Condensing
Wireless Range	200 feet (line of sight)
Weight	0.5 lbs