Honeywell 600 Series - User Manual

34-XY-16U-47
Issue 21
Page 1 of 3
XYR 6000 Wireless Transmitter
Model Selection Guide
High Level Input Interface
Series 600
Instructions
Select the desired Key Number. The arrow to the right marks the selection available.
Make one selection from each Table, I and II.
Select as many Table III options as desired (if no options or approvals are desired, specify 9X).
A (w) denotes unrestricted availability. A letter denotes restricted availability.
Restrictions follow Table V.
Key Number II III IV V
_ _ _ _ _ _ _
-
-
- _ _ _ _ _ -
_ _, _ _, _ _
- _ _ _ _
Key Number Selection Availability
Description
* Wireless Analog Input Interface (0/1 to 5 and 0/4-20 mA)
* Only 0/4 to 20 mA input is certified as Intrinsically Safe. 0/1 to 5V input is not certified as Intrinsically Safe.
TABLE I - Options
Future 
TABLE II Options
Future 
TABLE III - ANTENNA OPTIONS
Antennas Integral Right-angle, vertical 2dBi d
Integral Straight, horizontal 2dBi d
Integral Right-angle, vertical 4dBi d
Remote Omnidirectional, 8 dBi p
Remote Directional, 14 dBi e
Remote Antenna Adapter, Type N Connection d
Cable A for
None 
Remote Antenna 1.0m remote Cable A, Type TNC (Req'd to connect to XYR 6000) f
3.0m remote Cable A, Type TNC (Req'd to connect to XYR 6000) f
10.0m remote Cable A, Type TNC (Req'd to connect to XYR 6000) f
1.0m remote Cable A, Type N (Req'd to connect to XYR 6000) 
3.0m remote Cable A, Type N (Req'd to connect to XYR 6000) 
10.0m remote Cable A, Type N (Req'd to connect to XYR 6000) 
Cable B None 
for Remote Antenna Accessory + 1.0m Cable B to Antenna, N - N 
w/Accessories* Accessory + 3.0m Cable B to Antenna, N - N 
Accessory + 10.0m Cable B to Antenna, N - N 
* See Supplemental Accessories
TABLE IV - OPTIONS
Radio Options
(Must Choose a Radio Option)
2.4 GHz Frequency Hopping Spread Spectrum (FHSS)  b
2.4 GHz Direct Sequence Spread Spectrum (802.15.4 DSSS) 
ISA 100.11a Compliant (2.4 GHz Direct Sequence Spread Spectrum 802.15.4 DSSS-FH) 
Power Option (Must Choose Power Option)
Battery Holder Only - No Battery Included 
Battery Power 
24VDC 
Transmitter Housing & Electronics Options
M20 Conduit Thread (1/2" NPT is standard) f
1/2" NPT to 3/4" NPT 316 SS Conduit Adapter g
1/2" NPT to 3/4" NPT 316 SS Conduit Adapter (Quantity of 2 for 24VDC Option) A4 h

316 SS
1,2
Housing with 1/2" NPT Conduit Connection

Stainless Steel Customer Wired-On Tag 
(4 lines, 28 characters per line, customer supplied information) b
Stainless Steel Customer Wired-On Tag (blank) 
End Cap Warning Label in Spanish 
End Cap Warning Label in Portuguese  b
End Cap Warning Label in Italian 
End Cap Warning Label in German

Transmitter Mounting Brackets Options
Mounting Bracket - Carbon Steel 
Mounting Bracket - 304 SS  b
Flat Mounting Bracket - Carbon Steel 
Services/Calibration/Conformance Options
User's Manual Paper Copy 
Calibration Test Report and Certificate of Conformance (F3399) 
Certificate of Conformance (F3391) 
Certificate Options
Certificate of Origin (F0195) 
Warranty Options
Additional Warranty - 1 year 
Additional Warranty - 2 years  b
1
Supplied as 316 SS or as Grade CF8M, the casting equivalent of 316 SS.
2
If ordered with Remote Antenna option, Table III Selection M _ _ _ _ or D _ _ _ _, antenna parts are not SS or Marine type cables
F5
W1
W2
MB
SB
FB
UM
F1
b
F3
TG
TB
SP
PG
TL
GE
A1
b
A2
316 SS
1,2
Electronics Housing - with M20 Conduit Connections
SH
b
A3
_ _ _ 1 0
XF
XD
XS
00
b
BA
DC
_ 2 1 _ _
_ 2 3 _ _
_ 2 9 _ _
_ _ _ 0 0
_ _ _ 0 1
_ _ _ 0 3
D _ _ _ _
A _ _ _ _
_ 0 0 _ _
_ 0 1 _ _
_ 0 3 _ _
_ 1 0 _ _
000
0000
V _ _ _ _
S _ _ _ _
R _ _ _ _
M _ _ _ _
I
000
0000
STIW600

Honeywell 600 Series Specifications

General

Brand	Honeywell
Model	600 Series
Category	Recording Equipment
Language	English