Honeywell XI581AH User Manual

Copyright © 2000 Honeywell Inc. • All Rights Reserved
EN2B-0126GE51 R1000 (74-3554-8)
XI581AH / XI582AH
BUSWIDE OPERATOR INTERFACE
USER GUIDE
Software License Advisory This document supports software that is proprietary to Honeywell Inc. and/or to
third-party software vendors. Before software delivery, the end user must execute
a software license agreement that governs software use. Software license agree-
ment provisions include limiting use of the software to equipment furnished,
limiting copying, preserving confidentiality, and prohibiting transfer to a third party.
Disclosure, use, or reproduction beyond that permitted in the license agreement is
prohibited.

Honeywell XI581AH Specifications

General

Brand	Honeywell
Model	XI581AH
Category	Recording Equipment
Language	English

Summary

INTRODUCTION

Controller Models

Describes the controller models that can be accessed by the XI581/2.

XI581/2 Differences

Highlights the physical and operational differences between the XI581AH and XI582AH.

GETTING STARTED

Connection Options

Details the physical connection options for the XI581AH and XI582AH.

Buswide Access Mode

Explains the concept and operation of communicating with remote controllers.

Operator Access Levels

Explains the different security levels and permissions for operator access.

EVERYDAY OPERATIONS

Local and Remote Sign-On and Sign-Off

Describes procedures for accessing controllers locally or remotely.

Alarm Information

Covers viewing and managing alarm data from controllers.

Viewing Point Information

Explains how to access and view details of specific data points.

Start-up and Configuration

Hardware Interface Configuration

Details configuration options for C-Bus, LON-Bus, and B-Port interfaces.

Application Selection

Process for selecting and loading application programs into the controller.

Data Point Wiring Check

Procedure for verifying input/output wiring and controller connectivity.

ALPHABETIC REFERENCE

Data Point Description Function

Defines point attributes and explains how to view and modify them.

Passwords

Procedures for changing operator passwords for access levels 2 and 3.

System Clock

How to modify controller date, time, and daylight savings settings.

Time Programs

Details on scheduling equipment operation based on time programs.

Appendix A: Hardware SETUP

Procedure

Describes routing cables and enabling/disabling the backlighting feature.