EVERYDAY OPERATIONS XI581/2 BUSWIDE OPERATOR INTERFACE
EN2B-0126 (74-3554-8) 26
Htg_zone_pump_1
Status : ON
Operating Mode: AUTO
Trend Logging : OFF
Back Next
To move forward to the next page, highlight Next and press Enter
(↵). To move backward a page, press Cancel (C). To return to the
previous menu, highlight Back, and press Enter (↵).
Second window example:
Htg_zone_pump_1
Technical Address : 010205
Accumulated Runtime : 12736 h
Service Interval : 500 h
Hours Since Serviced: 398 h
Back Next
Third window example:
Htg_zone_pump_1
Last Changed : 15:36 07.06.1993
Cycle Count : 656
Suppress Alarm : NO
Back
The information (or “attributes”) appearing in a point description varies
depending on the type of point you selected (digital, analog, or totalizer). For
more information on the different point descriptions and their attributes, see
section "Data Point Description Function" (page 47).
4. Use the arrow keys to move to and highlight Back and press Enter (↵) to return
to the list of points (by user address). When you are finished, repeatedly press
Cancel (C) to return to the Main Menu.
See Also ⇒ section "Data Point Description Function" (page 47) for attribute information.
section "Selecting Points by Template" (page 54) for details on the Template search
function.
section "Selecting Points by Point Type" (page 55) for details on the Type search
function.
Reviewing Time Program Schedules
Purpose To display time program equipment start/stop schedules. For an overview of time
programs (daily programs, weekly programs, annual programs, the TODAY
program, and the special days program), see section "Time Programs" (page 75).
Select Time Program
Function from Main Menu 1. At the Main Menu, use the arrow keys to move to and highlight Time
Programmes. Press Enter (↵) to complete the selection.
RESULT: The 'Time Programme' screen lists available time programs.
Time Programme
Time Program 1 ▲
▲▲
▲
Ventil. Sys ■
Lighting 1
Heating zone east ■
To Next Page
Loading...
