XI581/2 BUSWIDE OPERATOR INTERFACE EVERYDAY OPERATIONS
31 EN2B-0126 (74-3554-8)
Controller Information
Reading the Controller Clock
Purpose To read the controller date and time and the starting/ending daylight savings times.
All users can perform this task.
Select System Clock from Main Menu 1. At the Main Menu, use the arrow keys to move to and highlight System Clock.
Press Enter (↵) to complete the selection.
RESULT: The display window lists two options for viewing controller clock
information.
System Clock
Date / Time
Daylight Savings
Select System Clock Option 2. Select Date / Time to view controller clock or select 'Daylight Savings' to view
daylight savings time dates as follows:
Table 7. Daylight Savings Time
Date/Time Daylight Savings Time
Date / Time is highlighted by default. Press Enter
(
↵) to complete the selection.
RESULT: The display window shows the
current date and time.
Use the arrow keys to move to and highlight
Daylight Savings. Press Enter (
↵) to complete the
selection.
RESULT: The display window shows the dates
the controller currently uses to deter-
mine when to run on Daylight
Savings Time.
System Clock
Date: 23.07.1993
Time: 13:50
Back
System Clock
Daylight Savings Start: 25.03
End: 30.09
Back
3. Press Enter (↵) to select Back (highlighted by default).
RESULT: The 'System Clock' screen redisplays.
4. When you are finished, repeatedly press Cancel (C) to return to the Main Menu.
Viewing Controller Configuration Data
Purpose To view system data for the controller.
Access Level All users can perform this task.
Select System Data from Main Menu 1. At the Main Menu, use the arrow keys to move to and highlight System Data.
Press Enter (↵) to complete the selection.
To Next Page
Loading...
