Honeywell XI581AH - Showing Application Data in Flash EPROM; Restoring Application Data from Flash EPROM to RAM

XI581/2 BUSWIDE OPERATOR INTERFACE ALPHABETIC REFERENCE
65 EN2B-0126 (74-3554-8)
Showing Application Data in Flash EPROM
Purpose To display controller application data stored in Flash EPROM.
Access Level You must have access level 3 to perform this task.
Select System Data from Main Menu 1. At the Main Menu, use the arrow keys to move to and highlight System Data.
Press Enter (↵) to complete the selection.
RESULT: The 'System Data' screen displays with controller name and software
version as well as three possible functions (depending on access
level).
System Data
System Info
HW-Interface Config.
Flash EPROM
Buswide Access
Select Flash EPROM 2. Use the arrow keys to move to and highlight Flash EPROM and then press
Enter (↵) to complete the selection.
RESULT: The 'Flash EPROM' screen lists options for controlling Flash EPROM.
Save application is highlighted by default.
Flash EPROM
Save Application
Erase Flash EPROM
Show Applications
Show Applications 3. Use the arrow keys to move to and highlight Show Applications and then press
Enter (↵) to complete the selection.
RESULT: The display window lists application programs in Flash EPROM with
their burn date and time.
Please choose Fixed Application
APPL_1 23.05.95 10:43 ▲
▲▲
▲
APPL_2 17.03.96 17:02 ■
APPL_3 11.11.97 23:00 1
APPL_4_NAME_ZU_LA 26.03.98 20:30 ■
APPL_5 08.08.98 14.26 ▼
NOTE: The Flash EPROM can save more than one controller application
program. If two or more application programs have the same name,
the most recently saved application program appears at the bottom of
the list of application programs.
Restoring Application Data from Flash EPROM to RAM
See section "Application Selection" (page 39).