XI581/2 BUSWIDE OPERATOR INTERFACE ALPHABETIC REFERENCE
91 EN2B-0126 (74-3554-8)
2. The entry in the 'Time to' field cannot be more than 24 hours after the 'Time
from' field.
For example, given the following times:
Current system time= 10:00 (Monday)
Time from= 9:00
Time to= 8:00
The Today Program functions as follows:
Starts 9 a.m. Tuesday (23 hours after the current system time)
Stops 8 a.m. Wednesday (23 hours after the 'Time from' field entry)
Value If the selected data point is an analog point, enter the new
value that the controller should execute (for example, the new
set point temperature for the conference room). If the selected
data point is a digital point, enter the new state (for example,
OFF, ON, or AUTO).
6. To modify additional Today Program fields, repeat previous process. When you
are done, highlight Back and press Enter (↵) to return to the list of points.
To redisplay the list of switch points, use the arrow keys to move to and highlight
Select and press Enter (↵) to complete the selection.
7. When you are finished, repeatedly press Cancel (C) to return to the Main Menu.
Special Days
Purpose To modify (assign) or delete a special day assignment or change status
(enable/disable) of the special days program.
Access Level You must have Access Level 2 or 3 to perform this task.
Select Time Program Function
from Main Menu 1. At the Main Menu, use the arrow keys to move to and highlight Time
Programmes. Press Enter (↵) to complete the selection.
RESULT: The 'Time Programme' screen lists available time programs.
Time Programme
Time Program 1 ▲
▲▲
▲
Ventil. Sys ■
Lighting 1
Heating zone east ■
▼
NOTE: All time programs may not be able to appear in the display window at
the same time. To view time programs that do not display, press the
right arrow key to display the next page.
Select a Time Program 2. Use the arrow keys to move to and highlight the time program having the daily
program you want to assign to a special day. Then press Enter (↵) to complete
the selection.
RESULT: The top line of the window displays the selected time program. The
remaining lines display the types of time programs you can select.
To Next Page
Loading...
