Honeywell XI582AH User Manual

Copyright © 2000 Honeywell Inc. • All Rights Reserved
EN2B-0126GE51 R1000 (74-3554-8)
XI581AH / XI582AH
BUSWIDE OPERATOR INTERFACE
USER GUIDE
Software License Advisory This document supports software that is proprietary to Honeywell Inc. and/or to
third-party software vendors. Before software delivery, the end user must execute
a software license agreement that governs software use. Software license agree-
ment provisions include limiting use of the software to equipment furnished,
limiting copying, preserving confidentiality, and prohibiting transfer to a third party.
Disclosure, use, or reproduction beyond that permitted in the license agreement is
prohibited.

Honeywell XI582AH Specifications

General

Category	Recording Equipment
Type	Digital Voice Recorder
Memory	8 GB internal memory
Battery Life	Up to 20 hours
Playback Features	A-B repeat
File Format	MP3
Connectivity	USB

Summary

Introduction to XI581AH/XI582AH Operator Interface

Manual Organization Overview

Describes the structure and sections of the user manual for clarity.

Controller Models and Differences

Lists accessible Excel controller models and highlights physical differences between XI581AH and XI582AH.

Getting Started with XI581/2 Operator Interface

Getting Started Section Overview

Outlines the topics covered in the Getting Started section for user guidance.

Connection Options for Operator Terminals

Details how to physically connect the XI581AH and XI582AH operator terminals to controllers.

Buswide Access Mode Explained

Explains communication between XI581/2 and non-directly connected Excel controllers.

Display Area and Keypad Functions

Describes the layout of the XI581/2 display window, keypad, and navigation.

Operator Access Levels and Permissions

Explains the three access levels and the permissions associated with each.

Everyday Operations with XI581/2

Everyday Operations Overview

Details the common everyday procedures covered in this section.

Local and Remote Controller Sign-on

Procedures for accessing and signing off from controllers, local or remote.

Level 2/3 Password Entry Procedure

Describes the process of entering a password for access level 2 or 3.

Logging into and Off Remote Controllers

Steps to establish communication with and disconnect from remote controllers.

Alarm Information and Handling

How to view local and buswide alarm information and manage notifications.

Start-up and Configuration Procedures

Controller Reset and Initial Setup

Procedure to reset the controller and modify initial date, time, and number.

Hardware Interface Configuration

Configuring C-Bus, LON-Bus, and B-Port serial links for controller operation.

Application Selection and Download

Selecting and loading application programs from Flash EPROM and requesting downloads.

Data Point Wiring Check and Assignment

Checking system I/O and assigning Distributed I/O modules.

Alphabetic Reference for XI581/2 Functions

Data Point Description and Modification

Defines point attributes and how to access/modify point descriptions.

Selecting and Modifying Points

Finding points by user address, template, or type, and modifying their attributes.

Managing Point Operations and Alarms

Changing operating modes, listing runtime, disabling trend logging, and suppressing alarms.

Flash EPROM and RAM Management

Procedures for managing application data between Flash EPROM and RAM.

System Clock and Parameter Settings

Modifying controller date/time, Daylight Savings, and parameter values.

Template Operations and Time Programs

Managing templates and setting up time programs for equipment control.

Totalizer and Bus Device Viewing

Resetting totalizers and displaying active devices on the system bus.

Appendix A: Hardware Setup Guide

Hardware Setup Procedures

Instructions for routing cables and enabling/disabling the XI581/2 backlighting feature.