Honeywell XI582AH - TODAY Programs

XI581/2 BUSWIDE OPERATOR INTERFACE ALPHABETIC REFERENCE
89 EN2B-0126 (74-3554-8)
RESULT: The display window lists the selected day with its new daily program
assignment. Example:
Annual Progr.: Time Program 1
Selected Day : 24.07.1995
Daily Progr. : Everyday
Back Switch Points Assign
9. To assign the selected program, press Enter (↵). The software assigns the daily
program and redisplays the 'Annual Program' screen with the new assignment.
To redisplay the 'Time Programme' screen with the 'Today', 'Daily Programme',
etc., menu items, use the arrow keys to move to and highlight Back and press
Enter (↵). The software does not change the assignment for the day.
To display the 'Switch Points' screen for assignment of new switch times (that is,
modify the daily program), use the arrow keys to move to and highlight Switch
Points and press Enter (↵) to complete the selection. To modify the switching
point, refer to the "Modify Switch Point" section for details.
10. Select another day to modify or press Cancel (C) to return to the 'Time
Programme' screen.
RESULT: The 'Time Programme' screen appears. To verify that the controller
made the change, you must reaccess the annual program.
TODAY Programs
Purpose To create or modify the TODAY program. To accommodate special events (such as
unplanned conferences and after-hour assemblies), the TODAY program can
override a point action or switch point associated with the daily program that is
assigned to a specific day in the annual program.
Assign the TODAY program up to 24 hours before the daily program would normally
execute.
Access Level You must have Access Level 2 or 3 to perform this task.
Select Time Program Function
from Main Menu 1. At the Main Menu, use the arrow keys to move to and highlight Time
Programmes. Press Enter (↵) to complete the selection.
RESULT: The 'Time Programme' screen lists available time programs.
Time Programme
Time Program 1 ▲
▲▲
▲
Ventil. Sys ■
Lighting 1
Heating zone east ■
Heating zone west ▼
NOTE: All time programs may not be able to appear in the display window at
the same time.
Select a Time Program 2. Use the arrow keys to move to and highlight desired time program. Then press
Enter (↵) to complete the selection.
RESULT: The top line of the window displays the selected time program. The
remaining lines display the types of time programs.