Honeywell XI582AH - Switch Points

XI581/2 BUSWIDE OPERATOR INTERFACE ALPHABETIC REFERENCE
81 EN2B-0126 (74-3554-8)
Time Programme: Time Program 1
Modify Delete
New Copy
RESULT: The top line of the display window shows the selected time
program. The remaining lines list daily program functions
(Modify, New, Delete, and Copy).
Delete Daily Program Function 2. Use the arrow keys to move to and highlight Delete and then press Enter (↵) to
complete the selection.
RESULT: The window lists the daily programs you can delete.
Time Programme: Time Program 1
Everyday ▲
▲▲
▲
Weekend ■
Holiday 1
Workday ■
Annual leave ▼
NOTE: All daily programs may not be able to appear in the display window at
the same time.
Select a Daily Program to Delete 3. Use the arrow keys to move to and highlight the daily program you want to
delete (for example, Holiday). Then press Enter (↵) to complete the selection.
RESULT: The window asks you to confirm that you really want to delete the
daily program.
Time Progr. : Time Program 1
Daily Progr.: Holiday
Really delete? Yes
No
Delete Daily Program 4. If you do not want to delete the daily program, press Enter (↵).
If you do want to delete the daily program, use the arrow keys to move to and
highlight Yes and press Enter (↵) to complete the selection.
RESULT: If the daily program could not be deleted because it is still part of a
weekly or annual program, the message DELETE IMPOSSIBLE
flashes at the bottom of the display window.
If the program was deleted (or you canceled the deletion), the 'Time
Programme' screen lists available time programs.
5. Press Cancel (C) to return to the list of time programs.
Switch Points
Purpose To add, modify, or delete a daily program switch point.
Access Level You must have Access Level 2 or 3 to perform this task.
Procedure 1. Display the 'Daily Program' screen that lists daily program functions ('Modify',
'New', 'Delete', and 'Copy'), if the menu is not already on display.
Summary of steps:
a. At the Main Menu, use the arrow keys to move to and highlight Time
Programme. Press Enter (↵) to complete the selection.