XI581/2 BUSWIDE OPERATOR INTERFACE ALPHABETIC REFERENCE
69 EN2B-0126 (74-3554-8)
Change Password
Password Level 2: 2222
Password Level 3: 3333
BACK
Enter New Password 6. Use the arrow keys to move to and highlight a password field and press Enter
(↵) to complete the selection.
RESULT: The first, left-most digit of the password field begins blinking.
7. Use the plus or minus keys to increment or decrement password number. Press
the right arrow key to move the cursor to next digit.
Repeat this procedure until you have correctly entered all digits of the new
password.
Press Enter (↵) to complete entry of the new password.
8. Use the up and down arrow keys to move to and highlight Back and press Enter
(↵).
RESULT: The display window shows the Main Menu.
Remote Communication
Purpose To change baud rate of controller and reset modem.
Access Level You must have access level 3 to perform this task.
Select System Data from Main Menu 1. At the Main Menu, use the arrow keys to move to and highlight System Data.
Press Enter (↵) to complete the selection.
RESULT: The 'System Data' screen displays four possible options (depending
on access level).
System Data
System Info
HW-Interface Config.
Flash EPROM
Buswide Access
2. Use the arrow keys to move to and highlight System Info. Then press Enter (↵)
to complete the selection. The following screen displays.
HW-Interface Configuration
C-Bus ▲
▲▲
▲
Lon-Bus 1
B-Port ■
3. Use the arrow keys to move to and highlight Modem. Then press Enter (↵) to
complete the selection. The 'Modem Configuration' screen is displayed.
To Next Page
Loading...
