ALPHABETIC REFERENCE XI581/2 BUSWIDE OPERATOR INTERFACE
EN2B-0126 (74-3554-8) 68
CONTROLLER_07 18:16!
Running 15.12.1994
Password Alarms
Time Programmes Trend Buffer
Data Points System Clock
System Data
Level 2 and 3 Operators 2. Press Enter (↵) to select the 'Password' function.
NOTE: If the 'Password' function is not highlighted, use the up or down arrow
keys to move to and highlight this item and then press Enter (↵) to
complete selection.
RESULT: Software asks for your password. The display window shows four
asterisks to hide your password when you enter it.
Please enter your Password:
****
3. Press Enter (↵) to select the password field (four asterisks).
— The display window shows a 5 as the first, left-most digit of the password
field.
— If the first digit of your password is higher than 5, press the plus key (or the
up arrow key) until the first digit of your password is correct.
— If the first digit of your password is lower than 5, press the minus key (or the
down arrow key) until the first digit of your password is correct.
— Press the right arrow key to move the cursor to the second digit. Notice that
the first digit becomes an asterisk again to maintain password privacy.
Repeat this procedure until you have correctly entered all digits in the password
field.
NOTES:
1. The default password for level-2 operators is 2222 and the default password
for level-3 operators is 3333.
2. The password for level-3 operators corresponds to the password for Excel
Live CARE. If you change the XI581/2 level-3 password, you will
automatically modify the password for Live CARE, too.
4. Press Enter (↵) to complete password entry.
RESULT: Next is highlighted at the bottom of the window.
Please enter your Password:
****
Change NEXT
5. Use the arrow keys to move to and highlight Change and then press Enter (↵).
RESULT: The display window lists the current passwords for level-2 and level-3
operator passwords.
To Next Page
Loading...
