ALPHABETIC REFERENCE XI581/2 BUSWIDE OPERATOR INTERFACE
EN2B-0126 (74-3554-8) 70
Modem Configuration
Baudrate: 9600
GSM PIN : ********
Reset Modem NEXT
4. Modify the modem baud rate by using the arrow keys to move to and highlight
the field, press Enter (↵) to select the field, use the plus and minus keys to
increment/decrement data, and press Enter (↵) to complete the entry.
To send a reset command to the modem to return it to factory default settings,
use the arrow keys to move to and highlight Reset Modem, and press Enter (↵)
to complete the selection.
System Clock
Purpose To modify the controller date/time and define the range of days for Daylight Savings
Time.
Access Level You must have access level 2 to perform this task.
Select System Clock from Main Menu 1. At the Main Menu, use the arrow keys to move to and highlight System Clock.
Press Enter (↵) to complete the selection.
RESULT: The 'System Clock' screen lists two options for viewing system clock
information.
System Clock
Date / Time
Daylight Savings
Select System Clock Option 2. Select Date / Time to change controller clock or select 'Daylight Savings' to set
Daylight Savings Time as follows:
Table 9. Daylight Savings Time (Alphabetic Reference)
Date/Time Daylight Savings Time
Date / Time is highlighted by default. Press Enter
(
↵) to complete the selection.
RESULT: The display window shows the
current date and time.
Use the arrow keys to move to and highlight
Daylight Savings. Press Enter (
↵) to complete the
selection.
RESULT: The display window shows the dates
the controller currently uses to deter-
mine when to run on Daylight
Savings Time.
System Clock
Date: 23.07.1993
Time: 13:50
Back
System Clock
Daylight Savings Start: 25.03
End: 30.09
Back
To Next Page
Loading...
