ALPHABETIC REFERENCE XI581/2 BUSWIDE OPERATOR INTERFACE
EN2B-0126 (74-3554-8) 74
Modifying a Template
Purpose To modify an existing template in the template buffer.
Access Level You must have access level 2 or 3 to perform this task.
Procedure 1. From the Main Menu, use the arrow keys to move to and highlight Data Points.
Press Enter (↵) to complete the selection.
RESULT: The 'Data Points' screen displays.
Data Points
User Address Suppress Alarm
Manual Operation Add Template
Accumul. Runtime Delete Template
Type Selection Modify Template
Points in Trend Template Search
Select Modify Template 2. Use the arrow keys to move to and highlight Modify Template. Press Enter (↵)
to complete the selection.
RESULT: The 'Modify Template' screen shows a list of available templates.
Modify Template
FLOOR7* ▲
▲▲
▲
FLOOR1* ■
1
■
▼
Select Template 3. Use the arrow keys to move to and highlight the template you want to modify.
Then press Enter (↵) to complete the selection.
RESULT: The 'Modify Template' screen displays the selected template.
Modify Template
FLOOR1*
Store Template Back
Select String 4. Press Enter.
RESULT: The first character in the string is now blinking.
Position Cursor 5. Use the left and right arrows to position the cursor at the character where you
want to modify the string.
RESULT: The selected character is now blinking and can be edited.
Replace Character 6. Use the plus and minus keys to choose the character that you want to use to
replace the blinking character. Each time you press the plus/minus key, the
blinking character changes through a pattern of ?, *, a blank, and then back to
the original character.
Question mark
? Match exactly one character of any type.
Asterisk * Match any number of characters until the next occurrence of a
character that must be matched exactly.
To Next Page
Loading...
