EasyManua.ls Logo

Honeywell XI581AH - Level 2;3 Password Entry

Honeywell XI581AH
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EVERYDAY OPERATIONS XI581/2 BUSWIDE OPERATOR INTERFACE
EN2B-0126 (74-3554-8) 16
Main Menu (Access Level 1)
CONTROLLER_01 18:16!
Running 15.12.1994
Password Alarms
Time Programmes Trend Buffer
Data Points System Clock
System Data
Level 1 Operators Level-1 operators do not have to enter a password.
Level 2 & 3 Operators Level-2 and level-3 operators must enter a password to perform level-2 and level-3
operations. See "Level 2/3 Password Entry" (page 16) for details.
Controller Power-on The first display screen that appears after power-on is a message about the power
failure. Use the Cancel key (C) to acknowledge the message. The Main Menu
displays.
Procedures This section describes the following procedures:
Level 2/3 password entry to enter a password if level-2 or level-3 functions are
required
Loging into a remote controller to gain access to a controller that is not directly
connected to the XI581/2
Logging off from a remote controller to disconnect from a remote controller that
you previously logged into
Signing off from a controller (local or remote) to return to the level-1 Main Menu.
Level 2/3 Password Entry
Purpose To sign on to an XI581/2 connected to a controller.
Procedure 1. After the XI581/2 is connected to a controller, the Main Menu automatically
appears in the display window unless the controller is reset and needs to be
downloaded. If the controller needs to be downloaded, the 'title/copyright' screen
displays.
NOTE: If the Main Menu does not appear, press Cancel (C) until it does.
RESULT: The Main Menu appears and lists information that level-1, -2, and -3
operators can view. The word Password is highlighted as the default
selection.
Level-2 and -3 Operators 2. Level-2 and level-3 operators do not have to enter a password to perform a
level-1 task. However, to perform a level-2 or level-3 task, you must enter a
password using the 'Password' function. Press Enter () to select the 'Password'
function.
NOTE: If the 'Password' function is not highlighted, use the arrow keys to
move to and highlight the item and then press Enter ().
RESULT: XI581/2 asks for your password. The display window shows four
asterisks where you enter your password.
Please enter your Password:
****

Table of Contents

Related product manuals