EVERYDAY OPERATIONS XI581/2 BUSWIDE OPERATOR INTERFACE
EN2B-0126 (74-3554-8) 40
RESULT: The display window lists application programs in Flash EPROM with
their burn date and time.
Please choose Fixed Application
APPL_1 23.05.95 10:43 ▲
▲▲
▲
APPL_2 17.03.96 17:02 ■
APPL_3 11.11.97 23:00 1
APPL_4_NAME_ZU_LA 26.03.98 20:30 ■
APPL_5 08.08.98 14.26 ▼
NOTE: The Flash EPROM can save more than one controller application
program. If two or more application programs have the same name,
the most recently saved application program appears at the bottom of
the list of application programs.
Load application from Flash EPROM 5. Use the arrow keys to move to and highlight the desired application program
and then press Enter (↵) to complete the selection.
RESULT: The application program in Flash EPROM loads in RAM and the
display window shows the Main Menu (access level 1).
CONTROLLER_07 18:16
Init 15.12.1994
Password Alarms
Time Programmes Trend Buffer
Data Points System Clock
System Data
Requesting a Download
New applications can be downloaded to the controller’s Flash memory via the C-
Bus or the B-port. The controller must request the download from the device
executing the download. This option is found in the first 'Application Selection'
screen.
Application Selection
Select FLASH Application
Request Download
NOTE: The Select FLASH Application option appears only if there is at
least one application loaded in Flash EPROM.
Request Download 4. Use the arrow keys to move to and highlight Request Download and press
Enter (↵) to complete the selection.
RESULT: The following screen appears.
Please Execute Download
NOTE: After an application has been downloaded, the controller checks the
CARE application’s user ID and will not start the application if the ID
To Next Page
Loading...
