Honeywell 75585-02NMB User Manual

This manual covers a range of
conventional fire panel and include
system design, installation and
configuration information.
The fire panels covered are
designed in accordance with the
requirements of EN54 Part 2:1997
+ AMD 1 (and include optional
clauses 7.8, 7.10 & 7.11), plus the
requirements of EN54 Part 4:1997
+ AMD 1 and AMD 2.
This publication covers the
Conventional fire alarm panels:
q 1 zone panel:- 13270-01LB and
75585-01NMB
q 2 zone panel:- 13270-02LB and
75585-02NMB
q 4 zone panel:- 13270-04LB and
75585-04NMB
q 8 zone panel:- 13270-08LB and
75585-08NMB
q Fire alarm repeat panel:
13271-08LB and 75586-08NMB.
The panels are supplied without
batteries.
This manual is intended
for use by installers and
commissioning engineers.
A separate Operating
instructions and Log book
has been supplied along
with this booklet which
must be forwarded on to
the End User.
4188-424 issue 4_Part 1_10-09
Data, Installation and Commissioning guide
Fire Control and Repeat panels
(Conventional 1, 2, 4 and 8 Zone panel range)
Content Page
System design · · . . . . . 2
Cables - · · · · · . . . . . 4
Notes to installers . . . . . 5
Panel fixing· · · · . . . . . 6
Terminals · · · · . . . . . 8
Controls & indicators . . . . 9
Power up tests · · . . . . . 10
Installed system tests . . . 11
Config. considerations . . . 11
Access levels 2 · . . . . . 12
Operating instructions for
Access level 2 functions . . 12
Programming Options . . . 14
Operating instructions for
Access level 3 functions . . 14
Operating instructions for
Access level 4 functions . . 15
Fault indications · . . . . . 16
Fault finding · · · . . . . . 17
Specification for the
Control panel· · · . . . . . 20
Specification for the
Repeat panel· · · . . . . . 22
Parts list · · · · · . . . . . 23

Honeywell 75585-02NMB Specifications

General

Brand	Honeywell
Model	75585-02NMB
Category	Control Panel
Language	English

Summary

System Design

Electrical Supply and Circuits

Panel Fixing Procedures

Panel Installation and Wiring

Step-by-step guide for mounting, wiring, and securing the panel case.

Power Up and Initial Tests

Pre-Power Up Checks

Essential checks before applying power, including drawings and installation verification.

Power Up and Circuit Testing

Procedures for initial power up, circuit testing, and EEPROM protection.

System Testing and Configuration

Test Modes and Procedures

Covers test modes, configuration, and system testing requirements.

Access Level 2 Operations

Access Codes and Notes

AL2 Functionality

Instructions for display tests, test modes, and zone management (disable/enable).

Programming Options

Access Level Timeout and EEPROM

Notes on access level timeouts and EEPROM protection removal for programming.

Access Level 3 Settings

Details programming options for functions like cancel buzzer, display test, and alarm indication.

Access Level 4 Configuration

Alarm Rejection and Repeat Panel Setup

Zone and System Configuration

Fault Indications

Fault Cause and Description

Fault Finding Guide

Fault Diagnosis Flowchart

A visual flowchart to diagnose and identify system faults based on indicator status.

Fault Indication Details

PSU Fault Indications

Details power supply unit fault conditions and their corresponding indicator statuses.

Earth Fault Indications

Explains earth fault conditions and how they are indicated on the panel.

Control Panel Specifications

General Panel Specifications

Control Panel Power Supply Details

Details the mains supply, internal power circuits, battery charger, and approved batteries.

Repeat Panel Specifications