Honeywell 75585-08NMB User Manual

This manual covers a range of
conventional fire panel and include
system design, installation and
configuration information.
The fire panels covered are
designed in accordance with the
requirements of EN54 Part 2:1997
+ AMD 1 (and include optional
clauses 7.8, 7.10 & 7.11), plus the
requirements of EN54 Part 4:1997
+ AMD 1 and AMD 2.
This publication covers the
Conventional fire alarm panels:
q 1 zone panel:- 13270-01LB and
75585-01NMB
q 2 zone panel:- 13270-02LB and
75585-02NMB
q 4 zone panel:- 13270-04LB and
75585-04NMB
q 8 zone panel:- 13270-08LB and
75585-08NMB
q Fire alarm repeat panel:
13271-08LB and 75586-08NMB.
The panels are supplied without
batteries.
This manual is intended
for use by installers and
commissioning engineers.
A separate Operating
instructions and Log book
has been supplied along
with this booklet which
must be forwarded on to
the End User.
4188-424 issue 4_Part 1_10-09
Data, Installation and Commissioning guide
Fire Control and Repeat panels
(Conventional 1, 2, 4 and 8 Zone panel range)
Content Page
System design · · . . . . . 2
Cables - · · · · · . . . . . 4
Notes to installers . . . . . 5
Panel fixing· · · · . . . . . 6
Terminals · · · · . . . . . 8
Controls & indicators . . . . 9
Power up tests · · . . . . . 10
Installed system tests . . . 11
Config. considerations . . . 11
Access levels 2 · . . . . . 12
Operating instructions for
Access level 2 functions . . 12
Programming Options . . . 14
Operating instructions for
Access level 3 functions . . 14
Operating instructions for
Access level 4 functions . . 15
Fault indications · . . . . . 16
Fault finding · · · . . . . . 17
Specification for the
Control panel· · · . . . . . 20
Specification for the
Repeat panel· · · . . . . . 22
Parts list · · · · · . . . . . 23

Honeywell 75585-08NMB Specifications

General

Brand	Honeywell
Model	75585-08NMB
Category	Control Panel
Language	English

Summary

System Design

Power Supply and Circuits

Alarm and Auxiliary Circuits

Cables and Wiring

Terminals and Fuses

Controls and Indicators

System Power Up and Tests

Pre-Power Up Checks

Initial Power Up Procedure

Circuit Tests

System Tests and Configuration

Installed System Tests

Configuration Considerations

Delay Mode and Alarm Rejection

Access Level 2 Functions

Access Codes and Notes

Explains access codes and general notes for using Access Level 2.

Operating Instructions

Details how to perform display tests, set test modes, and manage zones.

Programming Options (Access Level 3)

Access Level 3 Functions

Details how to configure system settings via Access Level 3 codes.

Access Level 4 Functions

Advanced Configuration Options

Outlines advanced configuration options for trained engineers via Access Level 4.

Fault Indications

Fault Indicator Descriptions

Explains the meaning of various fault lights and the buzzer.

Silencing Fault Buzzers

Describes the procedure to silence the intermittent fault buzzer.

Fault Finding

Diagnostic Flowchart

Provides a diagnostic guide to identify the cause of system faults.

Power and Earth Faults

PSU Fault Indications

Lists specific indications for power supply unit faults at main and repeat panels.

Earth Fault Indications

Details the indications for earth faults on the system at main and repeat panels.

Specific Fault Indicators

Zone/Sounder Faults

Explains fault indications related to zone and sounder circuits.

Repeat Panel and System Faults

Covers fault indications for repeat panels and system software issues.