AreaRAE Plus & AreaRAE Pro User’s Guide
47
Mesh
The AreaRAE Plus/Pro’s secondary Mesh radio is designed to work in a RAE Systems wireless mesh
radio network. This type of flexible, robust wireless network provides reliable, low-cost operation and
supports point-to-point and point-to-multi-point networking with ProRAE Guardian monitoring software.
Options include:
Power On/Off
PAN ID
Channel
Factory Reset
On/Off
1. Press [Y/+] to see on or off state, and which is selected.
2. Press [N/-] to scroll to “On” or “Off.”
3. Press [Y/+] to select.
4. Press [Y/+] to “Save.” You can also press [N/-] to undo.
PAN ID
The AreaRAE Plus/Pro and any other devices that you want to interconnect wirelessly must have the
same PAN ID. You can set the PAN ID in the instrument or through ProRAE Studio II.
1. Press [Y/+] to increase the number and [N/-] to advance to the next digit.
2. After moving to the last digit and making changes, press [MODE].
Press [Y/+] to save the change.
Press [N/-] to undo the change.
To Next Page
Loading...
