Honeywell AreaRAE Pro - Page 48

AreaRAE Plus & AreaRAE Pro User’s Guide
48
Channel
The AreaRAE Plus/Pro and any other devices that you want to interconnect wirelessly must be operating
on the same channel.
1. Press [N/-] to step through the channel numbers from 1 through 10.
2. Once your selection is highlighted:
 Press [Y/+] to select the channel.
 Press [Y/+] to save your choice or press [N/-] to undo your changes.
Note: You cannot change the channel setting on an instrument equipped with a radio modem that operates
at a frequency of 868 MHz.
Factory Reset
Restore all the wireless settings to their original factory defaults.
Caution! Once you reset the wireless settings, you cannot retrieve any of the settings deleted by
performing this reset.
 Press [Y/+] to reset the wireless settings.
 Press [N/-] to exit without resetting the wireless settings.