EasyManua.ls Logo

Honeywell CHRONOTHERM T4700 - Thermostat Specifications

Honeywell CHRONOTHERM T4700
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
69-1396—2 4
Specifications
Models:
T4700A: SPST; makes heating circuit
on temperature fall.
T4700B: DPST; makes heating circuit
on temperature fall. Breaks both
sides of 240 volt line with switch in
OFF position.
Temperature Ratings:
Operating Range: -20 to +104°F (-30°
to +40°C).
Control Range: 45 to 80°F (7 to 27°C)
in 1° increments. Factory set at 16°C
(61°F).
Humidity Ratings: 55 to 95 percent
RH, non-condensing.
Wiring: 6 in. (150 mm) stranded copper
leadwires, suitable for connection to
aluminum wiring if approved special
service CO/ALR connectors are used.
Electrical Ratings (Noninductive):
3800W, 16A maximum;
500W, 2A minimum at 240V, 60 Hz.
Sensing Element: Electronic
thermistor.
Switching: Patented CoolSwitch®.

Other manuals for Honeywell CHRONOTHERM T4700

Related product manuals