What to do if my Honeywell CHRONOTHERM T4700 displays 'Oload'?
If your Honeywell Thermostat displays 'Oload', it means the connected load exceeds 3800W. To resolve this, ensure the total baseboard wattage connected does not exceed 3800W, as exceeding this wattage poses a fire hazard. Push the Reset key to clear the error and reset the clock.
Why does my Honeywell CHRONOTHERM T4700 show error code '06E'?
The '06E' error code on your Honeywell Thermostat indicates a power failure was detected. To clear this error and reset the clock, push the Reset key.
Initial startup sequence, self-test, and readiness for programming.
Default thermostat settings and pre-programmed 7-day schedule.
Step-by-step guide to setting the current day and time on the thermostat.
How to set WAKE, LEAVE, RETURN, and SLEEP times and temperatures daily.
Instructions for copying an existing day's schedule to other days.
Methods for temporarily or indefinitely overriding the programmed schedule.
Guide to changing display settings or programming modes (°C/°F, 7-day/5-1-1).
General| Operating Modes | Heat, Cool, Off |
|---|---|
| Programmability | 7-Day Programmable |
| Hold Feature | Yes |
| Battery Indicator | No |
| Type | Programmable Thermostat |
| Power Source | 24 VAC |
| Display Type | LCD |
| Compatibility | Single Stage Heating and Cooling Systems |
| Switching Voltage | 24VAC |
| Power Supply | 24VAC |
| Mounting | Wall Mount |
To Next Page
