82 CT47 Mobile Computer Series User Guide
Unpair a Paired Scanner
You can unpair the scanner to remove it from the Connected Device list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge .
3. Tap the menu icon and then tap Disconnect BT Scanner.
4. Tap Honeywell or Intermec.
5. Scan the Disconnect Barcode displayed on screen.
About Ethernet and USB Communications
You can use these optional CT47 series accessories to transmit data to and receive
data from another device using an Ethernet or USB cable connection:
•Home Bases
• Ethernet Home Bases
•Display Docks
•Snap-on Cup (USB)
Accessory documentation is available for download from the CT47 product page at
sps.honeywell.com.
For a complete list of compatible accessories for your mobile computer and their
part numbers, see the Accessory Guide available for download at
sps.honeywell.com.
Contact your local sales representative for ordering information.
USB Troubleshooting
• If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
driver is part of the Honeywell_Mobility SDK_Android software.zip file. To learn
where to get the software, see Developer Information on page 84.
• Check to make sure you have enabled the USB for file transfer. To learn more, see
Configure USB Connection and Transfer Files on page 21.
To Next Page
Loading...
Need help?
General
