9 - 4
Charging a Spare Battery Pack
The Auxiliary Battery Well (see page 9-3) located on the back panel charges a spare battery. The AUX
Battery LED (page 9-2) on the front panel indicates the charge status of the battery in this well. Charge
time is less than four(4) hours and the charge process is independent of the terminal well.
1. Insert the end of the battery without the locking tab into the bottom of the auxiliary well opening.
2. Snap the battery into place with a hinging motion. The Aux Battery LED lights orange.
3. The AUX Battery LED monitors the charge progress.
Bottom Panel Dimensions
136.3 mm.
(5.37 in.)
78 mm.
(3.1 in.)
162.2 mm.
(6.4 in.)
106 mm.
(4.2 in.)
108 mm.
(4.25 in.)
62 mm.
(2.4 in.)
To Next Page
Loading...
