6 - 14
Remove Programs
The Remove Programs settings enables you to remove programs installed on the terminal. Use this
setting to troubleshoot when you receive messages that the device is out of memory. The programs
removed in the Remove Programs setting are removed from volatile memory.
1. Tap Remove Programs. In the list, select the program you want to remove.
2. Tap Remove. The following message appears:
3. Tap Yes. Wait while the program is removed.
4. Verify that the program no longer appears in the list and the total storage memory adjusts.
Total storage memory available—The available memory adjusts automatically when a program is
removed; see Memory on page 6-10.
To Next Page
Loading...
