12 - 1
12
Dolphin Mobile Base Device
Overview
This charging and communication cradle is designed specifically for in-premise and in-transit data
collection applications. It features a flexible mounting bracket, a cigarette lighter adapter, and a power
cable to adapt it to your environment.
The serial connector supports RS-232 communication and power out to peripheral devices, such as
handheld scanners.
As the hub of your Dolphin mobile data collection system, the base performs three important functions:
charging, communications, and storage.
Charging
The base completes a full charge of the main battery pack in 4.5 hours. The base also provides power to
the intelligent battery charging system in all terminals that senses when a full charge has been achieved
and switches to a trickle charge to maintain the full charge.
Communications
The base transmits data to other devices at speeds of up to 115K baud via its RS-232 serial port.
Convenient Storage
Intelligent battery charging makes the base a safe and convenient storage receptacle for your Dolphin
terminal.
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
Note: The following warnings apply to 99XXXXX-XXXXXXI units (Hazardous Location rated. See Approvals by
Country on page 1-3.).
Replace only with battery pack type 200002586 manufactured by Honeywell International Incorporated.
Warning: Explosion Hazard. Charge or replace the battery only in an area known to be non-hazardous.
Warning: Explosion Hazard. Do not replace components unless power has been switched off or the area
is known to be non-hazardous.
Warning: Substitution of any components may impair suitability.
Warning: Explosion Hazard. Do not use external connectors in areas known to be hazardous.
To Next Page
Loading...
