EasyManua.ls Logo

Honeywell Dolphin 9950 - Chapter 14 - Dolphin Quadcharger Device; Overview

Honeywell Dolphin 9950
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 - 1
14
Dolphin QuadCharger Device
Overview
This 4-slot charging station provides intelligent battery management for the Li-ion battery packs used in
Dolphin terminals. The 4th slot features a battery analyzer that completely resets a battery, then displays
its remaining capacity.
Capacity
The charger holds 4 Li-ion batteries.
Charging Time
Charge time is 5 hours.
Charging Process
Each charging slot works independently of the other three. As battery packs charge, the charging circuitry
follows the two-step charging process (CC-CV) that is recommended for Li-ion batteries. The process
monitors changes in temperature, current, and voltage and resets the battery pack.
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.
Note: The following warnings apply to 99XXXXX-XXXXXXI units (Hazardous Location rated. See Approvals by
Country on page 1-3.).
Replace only with battery pack type 200002586 manufactured by Honeywell International Incorporated.
Warning: Explosion Hazard. Charge or replace the battery only in an area known to be non-hazardous.
Warning: Explosion Hazard. Do not replace components unless power has been switched off or the area
is known to be non-hazardous.
Warning: Substitution of any components may impair suitability.
Warning: Explosion Hazard. Do not use external connectors in areas known to be hazardous.
!
!
!
!
!
!
!

Table of Contents

Related product manuals