24 PCMCIA Option Manual
SUB-MATRIX PARAMETER CLASSIFICATION
PCMCIA
ROLLOVER
♦♦♣♣
Definition:
Determines if, once the end of archive file has b
een reached, new data
are copied at the beginning of this file, so that it contains the most
recent data, or not.
How to modify it:
Select or not rollover mode
Possible choices: DISABLE
ENABLE
Default value: DISABLE
SUB-MATRIX PARAMETER CLASSIFICATION
PCMCIA
LOG FREQ
♦♦♣♣
Definition:
Archive frequency used to log TRENDS files.
How to modify it:
Select a new frequency.
Possible choices: 1 s
5 s
10 s
15 s
30 s
1 mn
5 mn
10 mn
15 mn
30 mn
Default value: 10 s
Note:
In case of a change in the login frequency on the same file, the SDA
software will
make interpolations (depending if that option is configured
or not) to produce a trend at the highest frequency.
It is recommended in that case to read the file without interpolation.
SUB-MATRIX PARAMETER CLASSIFICATION
PCMCIA
% FULL
♦♣
Definition:
Determines PCMCIA EVENT threshold.
How to modify it:
Select a threshold in %.
Possible choices: 0 to 100%
Default value: 90% *
See also:
PCMCIA in EVENTS matrix
* The default value is 0% if the recorder was previousl
y equipped with a firmware revision older than 001AK.
To Next Page
Loading...
